<address id="l3hf1"></address>

<address id="l3hf1"></address>
<address id="l3hf1"><form id="l3hf1"></form></address>

    <address id="l3hf1"><listing id="l3hf1"></listing></address>
    <noframes id="l3hf1">

    产品详情

    LDD-V-JIG

    LAPCON隐形门阻尼器LDD-V用调节夹具LDD-V-JIG

    2 / 2搜索结果

    筛选项目
    • LAPCON隐形门阻尼器LDD-V用调节夹具
    • LDD-V-JIG
    ●用于调节LDD-V型的承座的位置。

    图纸/插图

    • 所有显示

      [How to Use]
      —1. Install the adjustment jig
      ①Fit the adjustment jig firmly into the body.
      *Right-handed and left-handed available.
      *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.

    • 所有显示

      —2. Horizontally adjust the counter plate
      ①Loosen the horizontal adjustment screws.
      ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.
      ③Tighten the horizontal adjustment screws.

    • 所有显示

      —3. Vertically adjust the counter plate
      ①Loosen the fixing nut.
      ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.
      ③Tighten the fixing nut or the counter plate shaft firmly.

    • 所有显示

      —4. Check
      ①When removing the jig and closing the door slowly to the end, “click” sounds once.
      *If the door does not close to the end or “click” sounds twice, perform depth adjustment.
      ②When opening the door, “click” sounds once, and the arm is pulled out.
      *If the arm can not be pulled out, perform depth adjustment.
      ③Check if the clearance between the arm and the counter plate shaft is appropriate.

    • 所有显示

      *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).
      ①Loosen the depth adjustment screws.
      ②Align the centre of the counter plate shaft with that of the door thickness.
      ③Tighten the depth adjustment screws.

    • [How to Use]
      —1. Install the adjustment jig
      ①Fit the adjustment jig firmly into the body.
      *Right-handed and left-handed available.
      *Be sure to adjust the counter plate position after adjusting the installation position of the hinges.
    • —2. Horizontally adjust the counter plate
      ①Loosen the horizontal adjustment screws.
      ②While holding the adjustment jig by hand, slowly close the door and align the counter plate shaft with the groove.
      ③Tighten the horizontal adjustment screws.
    • —3. Vertically adjust the counter plate
      ①Loosen the fixing nut.
      ②While holding the adjustment jig by hand, slowly close the door and align the top of counter plate shaft with the bottom of jig.
      ③Tighten the fixing nut or the counter plate shaft firmly.
    • —4. Check
      ①When removing the jig and closing the door slowly to the end, “click” sounds once.
      *If the door does not close to the end or “click” sounds twice, perform depth adjustment.
      ②When opening the door, “click” sounds once, and the arm is pulled out.
      *If the arm can not be pulled out, perform depth adjustment.
      ③Check if the clearance between the arm and the counter plate shaft is appropriate.
    • *Depth adjustment of the counter plate (adjustment jig LDD-V-JIG can not be used for depth adjustment).
      ①Loosen the depth adjustment screws.
      ②Align the centre of the counter plate shaft with that of the door thickness.
      ③Tighten the depth adjustment screws.

    规格表

    本体

    图片 型号 订货编码 报价
    LDD-V-R-JIG 270-025-276
    LDD-V-L-JIG 270-025-275
    图片 型号 订货编码 报价 RoHS Spec Material Colour Type EAN

    LDD-V-R-JIG

    270-025-276

    Right-handed

    ABS

    Orange

    Other

    4510932134682

    LDD-V-L-JIG

    270-025-275

    Left-handed

    ABS

    Orange

    Other

    4510932134675

    向右滑动以查看更多信息

    CAD下载

    本体

    型号
    LDD-V-R-JIG
    LDD-V-L-JIG
    型号 2D 3D RoHS 订货编码
    LDD-V-R-JIG DXF DWG SAT IGES X_T STEP

    270-025-276

    LDD-V-L-JIG DXF DWG SAT IGES X_T STEP

    270-025-275

    向右滑动以查看更多信息

    产品目录 (更新 2019/11/01)

    产品目录 (更新 2019/11/01)

    相关产品

    类别

    最近查看的项目

    无最近查看的产品。

    要跟踪所查看的项目,点击下面的 "保留历史记录" 按钮。

    无最近查看的产品。

    -所有产品,除非指定,都是精确到公制尺寸。

    -尺寸、表面处理、包装等发生变化或停产时,不会另行通知。

    -我们的责任仅限于更换商品。

    ×
    筛选
    筛选项目
    Search Remove ×
    RoHS
    Loading
    Cookie和隐私

    可帮助我们改善您的网站体验。使用本网站之时,即表示您同意我司使用Cookie。

    了解更多
    亚博体投